Todol Products

2- Part Foam Kits B SDS

Safety Data Sheet for Todol Products 2- Part Foam Kits B, revised 2016-09-09.

Open the full SDS (PDF)

Hazards

• H280 Contains gas under pressure; may explode if heated
• H315 Causes skin irritation
• H319 Causes serious eye irritation

Protective equipment

• Wear protective goggles or safety glasses with side shields.
• Use chemically resistant gloves (i.e. Nitrile gloves). Nitrile/butadiene rubber, butyl rubber, polyethylene, PVC (vinyl), or neoprene gloves are also effective.
• Use clothing that protects against dermal exposure. To ensure proper skin protection, wear PPE in such a manner that no skin is exposed.
• If atmospheric levels are expected to exceed the exposure levels, use a NIOSH approved air purifying respirator equipped with an organic vapor cartridge and a particulate filter. If atmospheric levels

First aid

• Eyes: Immediately flush eyes with large amounts of water for at least 15 minutes, holding the eyes open, occasionally lifting the upper and lower lids. Use lukewarm water if possible. Remove contact lenses if present and easy to do. If irritation persists, get medical attention.
• Skin: Flush skin with large amounts of water while removing contaminated clothing. Gently wipe product from skin with a damp cloth and continue rinsing for 15 minutes. Wash clothing before reuse. Call a physician if irritation persists.
• Swallowed: Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Get medical advice/attention.
• Breathing it in: Move the exposed person to fresh air immediately. If breathing is difficult or irregular, administer oxygen. If respiratory arrest occurs, start artificial respiration by a trained individual. Loosen tight clothing. Seek medical attention immediately.

Fire

Use dry chemical, carbon dioxide, alcohol resistant foams and water spray. Cans, cylinders, or refillable tanks may explode when exposed to extreme heat; highly toxic gases may be generated by decomposition or combustion. Keep upwind, wear full fire-fighting turn-out gear and SCBA, and use water spray to keep fire-exposed containers cool.

Spills

Wear recommended PPE, isolate the hazard area, eliminate ignition sources and ventilate. Prevent entry into drains, sewers or waterways. Cover drains, contain spill with large quantity of inert absorbent, collect into an approved open-head metal container, and clean the area with soap and water.

Ingredients (SDS section 3)

Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.