Sunburst Chemicals

Attack SDS

Safety Data Sheet for Sunburst Chemicals Attack, revised 2026-02-26.

Open the full SDS (PDF)

Hazards

• Harmful if swallowed.
• Causes severe skin burns and eye damage.

Protective equipment

• Wear protective gloves/protective clothing/eye protection/face protection.
• Wear protective gloves/protective clothing/eye protection/face protection.
• Wear chemical safety goggles.
• Rubber or vinyl gloves recommended when handling solid chemicals or their use solutions.
• If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA approved respiratory protection should be worn.

First aid

• Eyes: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTRE or doctor. Immediately rinse the contaminated eye(s) with lukewarm, gently flowing water for 15-20 minutes, while holding the eyelid(s) open. Seek immediate medical attention/advice.
• Skin: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. Wash gently and thoroughly with lukewarm, gently flowing water and mild soap for 5 minutes. Immediately call a Poison Centre or doctor.
• Swallowed: IF SWALLOWED: Immediately call a POISON CENTRE or doctor. Rinse mouth. Do NOT induce vomiting. Drink plenty of water. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.
• Breathing it in: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Remove source of exposure or move to fresh air. Get medical advice or attention if you feel unwell or are concerned.

Fire

Use water, carbon dioxide (CO2) or dry chemical. As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.

Spills

Avoid contact with skin, eyes and clothing and do not breathe spray mist. Ensure adequate ventilation and use personal protective equipment; material can make surfaces slippery. Avoid release to the environment. Contain and soak up spill with absorbent that does not react with the product, collect and reuse if possible, then flush area with water.

Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.