SGM

HSR – High Strength Render SDS

Safety Data Sheet for SGM HSR – High Strength Render, revised 2022-12-06.

Open the full SDS (PDF)

Hazards

• Causes skin irritation.
• Causes serious eye damage.
• May cause an allergic skin reaction.
• May cause cancer.
• May cause respiratory irritation.
• May cause damage to organs (Lung) through prolonged or repeated exposure.

Protective equipment

• In situations where there is potential splash or puff exposure of cement products, wear safety glasses with side shields or goggles.
• In extremely dusty or unpredictable environments wear unvented or indirectly vented goggles.
• Wear protective gloves.
• Where prolonged exposure to unhardened Portland cement products might occur, wear impervious clothing and gloves to prevent skin contact.
• Wear sturdy boots that are impervious to water and eliminate foot and ankle exposure.
• Use NIOSH/MSHA approved (30 CFR 11) or NIOSH approved (42 CFR 84) respirators in poorly ventilated areas, or if an applicable exposure limit is exceeded, or when dust causes discomfort or irritation.

First aid

• Eyes: Do not rub eyes. Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention immediately.
• Skin: Remove contaminated clothing immediately and wash skin with soap and water. In case of eczema or other skin disorders: Seek medical attention and take along these instructions. Wash contaminated clothing before reuse.
• Swallowed: Never give anything by mouth to a victim who is unconscious or is having convulsions. DO NOT INDUCE VOMITING. Rinse mouth thoroughly with water and give large amounts of water if person is conscious. Get medical attention.
• Breathing it in: If dust from the material is inhaled, remove the affected person immediately to fresh air. Call a POISON CENTER or doctor/physician if you feel unwell.

Fire

Use water fog, foam, dry chemical powder or carbon dioxide appropriate for the surrounding fire. Self-contained breathing apparatus and full protective clothing must be worn; hazardous combustion products may include carbon oxides.

Spills

Avoid dust formation; for dry spills use a HEPA vacuum into a sealable container, for wet spills absorb or cover with dry earth, sand or other non-combustible material. Keep unnecessary personnel away, wear appropriate protective equipment, and prevent entry into waterways, sewers, basements or confined areas.

Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.