MIRA WOOD - PRO INTERIOR PENETRATING STAIN SDS
Safety Data Sheet for Repcolite Paints, Inc. MIRA WOOD - PRO INTERIOR PENETRATING STAIN, revised 2015-06-04.




Hazards
- H225 Highly flammable liquid and vapor
- H372 Causes damage to organs through prolonged or repeated exposure.
- H304 May be fatal if swallowed and enters airways
- H316 Causes mild skin irritation
- H317 May cause an allergic skin reaction
- H340 May cause genetic defects.
- H350 May cause cancer
- H319 Causes serious eye irritation
- H411 Toxic to aquatic life with long lasting effects
Protective equipment
- Wear eye protection with side shields or goggles. Wear indirect-vent, impact and splash resistant goggles when working with liquids. If additional protection is needed for entire face, use in combinat
- Use gloves approved to relevant standards made from PVC, neoprene or nitrile rubber. Replace contaminated gloves.
- Use of an apron and over-boots of chemically impervious materials such as neoprene or nitrile rubber is recommended to avoid skin sensitization.
- If engineering controls do not maintain airborne concentrations adequate to protect worker, follow a respiratory protection program meeting OSHA 29 CFR 1910.134 and ANSI Z88.2. A suitable, NIOSH-appro
First aid
- Eyes: Rinse eyes cautiously with lukewarm, gently flowing water for several minutes, while holding the eyelids open. Remove contact lenses if present and easy to do. Continue rinsing for 15-20 minutes. If eye irritation persists: get medical advice/attention.
- Skin: Take off all contaminated clothing, shoes, and leather goods. Wash with plenty of lukewarm, gently flowing water for 15-20 minutes. If skin irritation or rash occurs: get medical advice/attention.
- Swallowed: Immediately call a POISON CENTER/doctor. Do NOT induce vomiting. If vomiting occurs naturally, lie on your side, in the recovery position.
- Breathing it in: Remove source of exposure or move person to fresh air and keep comfortable for breathing. IF exposed or concerned: get medical advice/attention. Eliminate all ignition sources if safe to do so.
Fire
Use dry chemical, foam, or carbon dioxide; water spray to cool or protect exposed materials. Vapors are heavier than air and may travel to ignition sources; vapor accumulations may flash or explode if ignited. Wear protective pressure self-contained breathing apparatus (SCBA) and full turnout gear.
Spills
ELIMINATE all ignition sources. Do not touch or walk through spilled material. Isolate hazard area and keep unnecessary people away. Stop spill if safe to do so; prevent entry into sewers and waterways. Dike area to contain spill and absorb with inert absorbent. Use positive pressure, full-face SCBA or supplied air respirator (NIOSH approved).
Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.
En español
Pictogramas: Inflamable, Irritante / nocivo, Peligro para la salud, Medio ambiente
Peligros:
- Líquido y vapores muy inflamables
- Provoca daños en los órganos tras exposiciones prolongadas o repetidas
- Puede ser mortal en caso de ingestión y penetración en las vías respiratorias
- Provoca una leve irritación cutánea
- Puede provocar una reacción alérgica en la piel
- Puede provocar defectos genéticos
- Puede provocar cáncer
- Provoca irritación ocular grave
- Tóxico para los organismos acuáticos, con efectos nocivos duraderos
Indicaciones de peligro en la redacción oficial del SGA en español. El equipo de protección y los primeros auxilios están arriba, como los dice la hoja. La hoja completa del fabricante es el documento oficial.
Try IDSDS free