BLACK METL CLAD SEMI GLOSS PAINT SDS
Safety Data Sheet for Repcolite Paints, Inc. BLACK METL CLAD SEMI GLOSS PAINT, revised 2024-02-29.



Hazards
- H225 Highly flammable liquid and vapor
- H304 May be fatal if swallowed and enters airways
- H350 May cause cancer
- H319 Causes serious eye irritation
- H340 May cause genetic defects.
- H360 May damage fertility or the unborn child
- H315 Causes skin irritation
- H317 May cause an allergic skin reaction
- H372 Causes damage to organs through prolonged or repeated exposure.
- H412 Harmful to aquatic life with long lasting effects
Protective equipment
- Wear protective gloves (PVC, neoprene or nitrile rubber gloves)
- Wear eye protection with side shields or goggles; indirect-vent, impact and splash resistant goggles when working with liquids
- Wear protective clothing
- Use of an apron and over-boots of chemically impervious materials such as neoprene or nitrile rubber is recommended to avoid skin sensitization
- If engineering controls do not maintain airborne concentrations adequate to protect worker, follow a respiratory protection program meeting OSHA 29 CFR 1910.134 and ANSI Z88.2
- A suitable, NIOSH-approved respirator and goggles should be worn when standing or grinding objects coated with this paint
First aid
- Eyes: Rinse cautiously with lukewarm, gently flowing water for several minutes, holding the eyelids open. Remove contact lenses if present and easy to do. Continue rinsing for 15-20 minutes. If eye irritation persists, get medical advice/attention.
- Skin: Take off all contaminated clothing, shoes, and leather goods. Wash with plenty of lukewarm, gently flowing water for 15-20 minutes. If skin irritation or rash occurs, get medical advice/attention.
- Swallowed: Immediately call a POISON CENTER/doctor. Do NOT induce vomiting. If vomiting occurs naturally, lie on your side, in the recovery position.
- Breathing it in: Remove source of exposure or move person to fresh air and keep comfortable for breathing. IF exposed or concerned, get medical advice/attention. Eliminate all ignition sources if safe to do so.
Fire
Use dry chemical, foam, or carbon dioxide; water spray to cool or protect exposed materials. Vapors may travel to distant ignition sources and vapor accumulations may flash or explode if ignited; closed containers may rupture from heat. Wear pressure self-contained breathing apparatus (SCBA) and full turnout gear.
Spills
Eliminate all ignition sources and do not touch or walk through spilled material. Isolate the hazard area, stop the spill if safe, prevent entry into sewers and waterways, dike to contain, and absorb with inert absorbent. Use positive pressure full-face SCBA or supplied air respirator with escape SCBA.
Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.
En español
Pictogramas: Inflamable, Irritante / nocivo, Peligro para la salud
Peligros:
- Líquido y vapores muy inflamables
- Puede ser mortal en caso de ingestión y penetración en las vías respiratorias
- Puede provocar cáncer
- Provoca irritación ocular grave
- Puede provocar defectos genéticos
- Puede perjudicar la fertilidad o dañar al feto
- Provoca irritación cutánea
- Puede provocar una reacción alérgica en la piel
- Provoca daños en los órganos tras exposiciones prolongadas o repetidas
- Nocivo para los organismos acuáticos, con efectos nocivos duraderos
Indicaciones de peligro en la redacción oficial del SGA en español. El equipo de protección y los primeros auxilios están arriba, como los dice la hoja. La hoja completa del fabricante es el documento oficial.
Try IDSDS free