Crack Patch Spackling SDS

Safety Data Sheet for Red Devil Crack Patch Spackling, revised 2013-07-04.

Protective equipment

Use approved safety goggles or safety glasses. If necessary, refer to appropriate regulations & standards.
Wear impervious gloves as required to prevent skin contact.
When air contaminants may exceed acceptable criteria, use NIOSH/MSHA approved respiratory protection equipment.

First aid

Eyes: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. Seek immediate medical attention/advice.
Skin: Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. If irritation persists, seek medical attention.
Swallowed: If accidentally swallowed, dilute by drinking large quantities of water. Immediately contact poison control center or hospital emergency room for any other additional treatment directions.
Breathing it in: Remove to fresh air. If breathing is difficult, leave area to obtain fresh air. If breathing remains difficult, get medical attention.

Fire

Use carbon dioxide, dry chemical, water spray (fog) or foam appropriate to local circumstances. As in any fire, wear self-contained breathing apparatus and full protective gear; use water spray to keep fire-exposed containers cool. Hazardous combustion products: carbon oxides.

Spills

Prevent further leakage or spillage if safe to do so and use absorbent material to contain spill. Sweep up absorbed material and shovel into suitable containers for disposal. Wash area with soap and water. Minimize use of water and prevent spill or rinse from entering storm drains, sewers, soil or groundwater.

Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.

Keep this SDS on your job site. Add it to a job's SDS list in IDSDS and every worker can open it from their phone, scan a label to find it, and read it in Spanish.
Try IDSDS free