Promat

GRADE 1000R SDS

Safety Data Sheet for Promat GRADE 1000R, revised 2021-10-11.

Open the full SDS (PDF)

Hazards

• Can occur: eye irritation, irritation of mucous membranes and skin irritation. As with most types of nuisance dust, excessive inhalation of dust may cause irritation of the bronchial tubes.

Protective equipment

• Avoid contact with eyes. Use safety glasses whenever tools are used and dusts are produced.
• Avoid contact with skin. Use working clothes and gloves to protect against mechanical injury and direct skin contact.
• Avoid breathing dusts. Use appropriate respiratory equipment when exposures are likely or can be foreseen to exceed the Occupational Exposure Limits or Workplace Exposure Limits for the UK (e.g. for e

First aid

• Eyes: Do not rub the eye. Rinse immediately with plenty of water. If eye irritation persists: Get medical advice/attention.
• Skin: Rinse affected areas with water, taking care not to scratch or rub. Seek medical attention if irritation or symptoms persist.
• Swallowed: Ingestion unlikely due to product form. Do not induce vomiting. Rinse mouth. Drink plenty of water. Call a POISON CENTER/doctor if you feel unwell.
• Breathing it in: Remove to fresh air and drink water. Seek medical attention if irritation or symptoms persist.

Fire

All extinguishing media can be used. Product is not explosive and is non-combustible. Covering can be organic or contain organic components which can decompose when heated to temperatures greater than 150°C, emitting toxic gases. Do not enter fire area without proper protective equipment, including respiratory protection.

Spills

Minimise generation of dust and avoid breathing dusts. Dampen down any dust or use vacuum cleaner with correct filter. Use closed containers to avoid dust release. Shovel up small pieces and dampen down any dust before putting into appropriate skips. Prevent spread of dust.

Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.