Permatex

Belt Dressing & Conditioner SDS

Safety Data Sheet for Permatex Belt Dressing & Conditioner, revised 2025-02-03.

Open the full SDS (PDF)

Hazards

• H222+H229 Extremely flammable aerosol. Pressurized container: May burst if heated.
• H340 May cause genetic defects.
• H350 May cause cancer.
• H361 Suspected of damaging fertility or the unborn child.
• H372 Causes damage to organs through prolonged or repeated exposure.
• H304 May be fatal if swallowed and enters airways.

Protective equipment

• Wear safety glasses with side shields (or goggles). Tight sealing safety goggles.
• Wear suitable gloves.
• Wear suitable protective clothing. Antistatic boots. Chemical resistant apron.
• Use appropriate respiratory protection.
• Do not eat, drink or smoke when using this product.

First aid

• Eyes: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Keep eye wide open while rinsing. Do not rub affected area. Get medical attention if irritation develops and persists.
• Skin: Wash skin with soap and water.
• Swallowed: ASPIRATION HAZARD IF SWALLOWED - CAN ENTER LUNGS AND CAUSE DAMAGE. Do NOT induce vomiting. If vomiting occurs spontaneously, keep head below hips to prevent aspiration. Rinse mouth. Never give anything by mouth to an unconscious person. Get immediate medical attention.
• Breathing it in: Remove to fresh air. Aspiration into lungs can produce severe lung damage. If breathing has stopped, give artificial respiration. Get medical attention immediately. Avoid direct contact with skin. Use barrier to give mouth-to-mouth resuscitation. If breathing is difficult, (trained personnel should) give oxygen. Delayed pulmonary edema may occur.

Fire

Suitable Extinguishing Media: Dry chemical. Carbon dioxide (CO2). Water spray. In case of fire, use water spray, foam, dry chemical, or CO2. DO NOT EXTINGUISH A LEAKING GAS FIRE UNLESS LEAK CAN BE STOPPED.

Spills

Personal precautions: Evacuate personnel to safe areas. Use personal protective equipment as required. See section 8 for more information. Avoid contact with skin, eyes or clothing. Ensure adequate ventilation. Keep people away from and upwind of spill/leak. ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Take precautionary measures against static discharges. Avoid breathing dust/fume/gas/mist/vapors/spray. Methods for containment: Stop leak if you can do it without risk. A vapor suppressing foam may be used to reduce vapors. Dike far ahead of spill to

Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.