Nu-Calgon

Cal-Brite Plus SDS

Safety Data Sheet for Nu-Calgon Cal-Brite Plus, revised 2025-10-04.

Open the full SDS (PDF)

Hazards

• Causes severe skin burns and eye damage.

Protective equipment

• Wear protective gloves, protective clothing, eye protection and face protection.
• Wear protective gloves, protective clothing, eye protection and face protection.
• Wear protective gloves, protective clothing, eye protection and face protection.
• Tight sealing safety goggles.
• Protective gloves.
• Impervious clothing. Protective shoes or boots.
• Appropriate respiratory protection should be selected and used according to the chemical nature, hazards and use of this product and safety requirements of the local jurisdiction. If exposure limits a

First aid

• Eyes: Do not rub affected area. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Keep eye wide open while rinsing.
• Skin: Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. For minor skin contact, avoid spreading material on unaffected skin. For severe burns, immediate medical attention is required.
• Swallowed: Rinse mouth. Drink 1 or 2 glasses of water. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Call a physician or poison control center immediately.
• Breathing it in: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, (trained personnel should) give oxygen. Call a physician or poison control center immediately.

Fire

Use extinguishing measures appropriate to local circumstances and the surrounding environment. Do not scatter spilled material with high pressure water streams. Thermal decomposition can release irritating and toxic gases and vapors. Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear.

Spills

Dam up and dike far ahead of liquid spill. Prevent product from entering drains. Soak up with inert absorbent material, take up mechanically into appropriate containers for disposal, clean the contaminated surface thoroughly, then flush away traces with water.

Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.