Mohawk Finishing

INSTRUMENT SEALER SDS

Safety Data Sheet for Mohawk Finishing INSTRUMENT SEALER, revised 2025-07-27.

Open the full SDS (PDF)

Hazards

• H225 Highly flammable liquid and vapour.
• H315 Causes skin irritation.
• H332 Harmful if inhaled.
• H336 May cause drowsiness or dizziness.
• H351 Suspected of causing cancer.
• H373 May cause damage to organs through prolonged or repeated exposure.
• H318 Causes serious eye damage.

Protective equipment

• Use adequate engineering controls and ventilation to keep levels below recommended or statutory exposure limits. If exposure levels exceed limits use appropriate approved respiratory protection equipm
• Wear chemical resistant footwear and clothing such as gloves, an apron or a whole body suit as appropriate.
• Wear chemical-resistant glasses and/or goggles and a face shield when eye and face contact is possible due to splashing or spraying of material.

First aid

• Eyes: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
• Skin: IF ON SKIN: Wash with plenty of soap and water. Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. Take off contaminated clothing and wash it before reuse. If skin irritation occurs: Get medical advice/attention.
• Swallowed: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF exposed or if you feel unwell: Call a POISON CENTER or doctor/physician.
• Breathing it in: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.

Fire

Evacuate all persons from the fire area. Wear self-contained breathing apparatus (SCBA) and full fire-fighting protective clothing. Use water spray to cool fire-exposed containers and to disperse vapors if a spill has not ignited. Do not extinguish a fire from flowing flammable liquid until the flow is effectively shut off. Use dry chemical, carbon dioxide, or similar ABC extinguisher for incipient fires.

Spills

Follow the personal protective equipment recommendations in Section 8 and never exceed occupational exposure limits. Shut off ignition sources, including electrical equipment and flames. Do not allow smoking in the area. Do not allow the spilled product to enter public drainage systems or open waterways.

Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.