MAPEI

PLANIPATCH PLUS SDS

Safety Data Sheet for MAPEI PLANIPATCH PLUS, revised 2025-09-24.

Open the full SDS (PDF)

Protective equipment

• Not needed for normal use. Anyway, operate according good working practices.
• No special precaution must be adopted for normal use.
• Suitable materials for safety gloves; 29 CFR 1910.138 - ANSI/ISEA 105: Polychloroprene - CR: thickness >=0,5mm; breakthrough time >=480min. Nitrile rubber - NBR: thickness >=0,35mm; breakthrough time
• Respiratory protection must be used where exposure levels exceed workplace exposure limits. Refer to 29 CFR 1910.134 - CSA Z94.4 for information on selection and use of appropriate respiratory protect

First aid

• Eyes: Wash immediately with water.
• Skin: Wash with plenty of water and soap.
• Swallowed: Do not induce vomiting, get medical attention showing the SDS and the hazard label.
• Breathing it in: Remove casualty to fresh air and keep warm and at rest.

Fire

Suitable extinguishing media: water and carbon dioxide (CO2). Use suitable breathing apparatus. Do not inhale explosion and combustion gases. Burning produces heavy smoke. Collect contaminated fire extinguishing water separately; it must not be discharged into drains.

Spills

Wear personal protection equipment and remove persons to safety. Do not allow to enter soil/subsoil, surface water or drains. Limit leakages with earth or sand. Take up with absorbing material (organic, sand) and retain contaminated washing water for disposal.

Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.