HUSKEY™ RUST RELEASE SDS
Safety Data Sheet for HUSKEY HUSKEY™ RUST RELEASE, revised 2018-06-15.
Hazards
- No known significant effects or critical hazards.
Protective equipment
- Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible
- Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary.
- Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
- Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this
- Based on the hazard and potential for exposure, select a respirator that meets the appropriate standard or certification. Respirators must be used according to a respiratory protection program to ensu
First aid
- Eyes: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention if irritation occurs.
- Skin: Flush contaminated skin with plenty of water. Get medical attention if symptoms occur.
- Swallowed: Wash out mouth with water. Remove victim to fresh air and keep at rest in a position comfortable for breathing. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms occur.
- Breathing it in: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical attention if symptoms occur.
Fire
Use dry chemical, CO2, water spray (fog) or foam. No specific fire or explosion hazard. Decomposition products may include carbon dioxide and carbon monoxide. Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Spills
Stop leak if without risk. Move containers from spill area. For small spills, dilute with water and mop up if water-soluble, or absorb with an inert dry material and place in an appropriate waste disposal container. For large spills, prevent entry into sewers and water courses, contain and collect spillage with non-combustible absorbent material and place in container for disposal according to local regulations. Dispose of via a licensed waste disposal contractor.
Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.
Try IDSDS free