Highside Chemicals

HL COIL BRITE SDS

Safety Data Sheet for Highside Chemicals HL COIL BRITE, revised 2025-03-30.

Open the full SDS (PDF)

Hazards

• H301 Toxic if swallowed.
• H314 Causes severe skin burns and eye damage.

Protective equipment

• Contact lenses should not be worn.
• Safety glasses
• Protective gloves; for permanent contact, fluorocarbon rubber (Viton) is suitable.
• Combined Organic Vapor and Particulate Respirator is recommended for use during all processing activities.
• Use protective suit.
• Boots
• Apron
• Full head, face and neck protection

First aid

• Eyes: Protect unharmed eye. Rinse opened eye for several minutes under running water. Remove contact lenses if worn, if possible. Then consult a doctor.
• Skin: Immediately rinse with water. Rub in Ca-gluconate solution or Ca-gluconate gel immediately. Seek immediate medical advice. Seek immediate medical help for blistering or open wounds.
• Swallowed: Rinse out mouth and then drink plenty of water. Do not induce vomiting; call for medical help immediately.
• Breathing it in: Supply fresh air or oxygen; call for doctor. Provide artificial respiration if breathing is irregular or stopped, without mouth-to-mouth resuscitation; use a respiratory bag or breathing device.

Fire

Use water in flooding quantities, foam, alcohol resistant foam, gaseous extinguishing agents or limestone powder. Poisonous gases are produced during heating or in fire. Wear self-contained respiratory protective device and fully protective suit; do not inhale explosion or combustion gases.

Spills

Use respiratory protective device and wear protective equipment; isolate area and keep unprotected persons away. Ensure adequate ventilation, pick up mechanically, and send for recovery or disposal in suitable receptacles. Clean the area with water plus calcium oxide or calcium carbonate. Do not allow entry into sewers or water courses.

Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.