MP502-D SDS
Safety Data Sheet for GPM MP502-D, revised 2019-01-17.
Protective equipment
- In order to avoid inhalation of spray-mist and sanding dust, all spraying and sanding must be done wearing adequate respirator.
- Sensitive individuals should wear gloves to prevent repeated contact.
- Safety glasses with side-shields
First aid
- Eyes: FLUSH EYES WITH WATER FOR AT LEAST 15 MINUTES. GET MEDICAL HELP IF IRRITATION PERSISTS.
- Skin: WASH WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING AND CLEAN BEFORE REUSE.
- Swallowed: DO NOT induce vomiting if ingested. Have the victim drink 8 to 10 ounces (240 - 300 ml) of water to dilute the material in the stomach. If vomiting occurs naturally, have the victim lean forward to reduce the risk of aspiration. Consult a physician immediately.
- Breathing it in: Remove person to fresh air. If signs/symptoms continue, get medical attention.
Fire
Use a self-contained breathing apparatus with full facepiece operated in pressure-demand or other positive pressure mode. USE WATER SPRAY TO COOL FIRE EXPOSED CONTAINERS. Extinguishing media: Carbon Dioxide, Dry Chemical, Foam, Water Fog. Container may rupture on heating.
Spills
ISOLATE HAZARD AREA AND KEEP UNNECESSARY PEOPLE AWAY. DO NOT ALLOW THE LIQUID TO ENTER INTO ANY SEWERS, ONTO THE GROUND OR INTO ANY BODY OF WATER. FOR LARGE SPILLS, USE A DIKE AND PUMP INTO APPROPRIATE CONTAINERS. SMALL SPILLS, DILUTE WITH WATER AND RECOVER OR USE NON-COMBUSTIBLE ABSORBENT MATERIAL AND SHOVEL INTO WASTE CONTAINERS.
Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.
Keep this SDS on your job site. Add it to a job's SDS list in IDSDS and every worker can open it from their phone, scan a label to find it, and read it in Spanish.
Try IDSDS free
Try IDSDS free