Gardner-Gibson

Gardner Silver Dollar SDS

Safety Data Sheet for Gardner-Gibson Gardner Silver Dollar, revised 2014-09-26.

Open the full SDS (PDF)

Hazards

• Flammable Liquid and Vapor per HCS2012.
• Contains Combustible Petroleum Distillates.
• Contains Aluminum Pigment.
• Contact with water can liberate highly flammable hydrogen gas.
• Repeated and prolonged overexposure to solvent vapor may cause brain and nervous system damage.
• May cause skin and eye irritation.
• Harmful or Fatal if swallowed.

Protective equipment

• In case of insufficient ventilation, wear suitable respiratory equipment. If listed exposure limits are expected to be exceeded, use approved respiratory protection suitable for the hazard.
• Wear ANSI approved safety glasses with side shields or safety goggles.
• Wear chemical protective gloves made of Nitrile or Neoprene.
• Wear clothing that covers the skin to prevent skin exposure.

First aid

• Eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
• Skin: Immediately flush skin with soap and plenty of water. Call a physician if symptoms occur. Remove contaminated clothing and shoes. Wash contaminated clothing before reuse.
• Swallowed: Do NOT induce vomiting unless directed to do so by medical personnel. Call a physician or poison control center immediately. Never give anything by mouth to an unconscious person.
• Breathing it in: Move victim to fresh air. If signs/symptoms continue, get medical attention. If breathing is difficult, give oxygen. If not breathing, give artificial respiration.

Fire

Use water spray, fog or regular foam for large fires; dry chemical, CO2, water spray or regular foam for small fires. Do not use direct water stream. Fire fighters should wear complete protective clothing including self-contained breathing apparatus.

Spills

Eliminate all ignition sources. Isolate the area and contain the spilled material. Contain and recover liquid when possible; absorb with inert material (e.g. sand, vermiculite) and place in suitable container. Do not flush to sewer or waterways or use water to flush the spill area.

Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.