Fiberlock Fiberset PM White 7470 SDS
Safety Data Sheet for Fiberlock Technologies Fiberlock Fiberset PM White 7470, revised 2020-01-22.
Protective equipment
- Safety glasses with side shields
- Chemical goggles.
- Wear general protective gloves, eg. light weight rubber gloves.
- Type A Filter of sufficient capacity. (AS/NZS 1716 & 1715, EN 143:2000 & 149:2001, ANSI Z88 or national equivalent)
- Overalls.
First aid
- Eyes: Wash out immediately with water. If irritation continues, seek medical attention. Removal of contact lenses after an eye injury should only be undertaken by skilled personnel.
- Skin: Flush skin and hair with running water (and soap if available). Seek medical attention in event of irritation.
- Swallowed: Immediately give a glass of water. First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor.
- Breathing it in: If fumes, aerosols or combustion products are inhaled remove from contaminated area. Other measures are usually unnecessary.
Fire
The product contains a substantial proportion of water, so there are no restrictions on extinguishing media. Alert Fire Brigade and tell them location and nature of hazard. Wear breathing apparatus plus protective gloves in the event of a fire. Material is not readily combustible under normal conditions, but decomposes on heating and produces toxic fumes of carbon dioxide and other pyrolysis products typical of burning organic material.
Spills
Clean up all spills immediately. Avoid breathing vapours and contact with skin and eyes. Major spills: minor hazard; clear area of personnel.
Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.
Try IDSDS free