Ergon Armor (Ergon Asphalt & Emulsions, Inc.)
NOVOCOAT™ HF1200 EPOXY PART B SDS
Safety Data Sheet for Ergon Armor (Ergon Asphalt & Emulsions, Inc.) NOVOCOAT™ HF1200 EPOXY PART B, revised 2021-10-29.


Hazards
- Causes severe skin burns and eye damage.
- May cause an allergic skin reaction.
- Causes serious eye damage.
Protective equipment
- Wear protective gloves/protective clothing/eye protection/face protection.
- Chemical goggles and face shield are recommended.
- Wear appropriate chemical resistant gloves.
- Chemical/solvent resistant gloves are recommended. If contact with forearms is likely, use gauntlet-style gloves.
- If in spray application, respiratory protection should include at a minimum a full-face air purifying respirator (APR) with combination particulate (P100) and organic vapor (OV) cartridges. As a subst
- Wear appropriate thermal protective clothing, when necessary.
First aid
- Eyes: Immediately flush eyes with plenty of water for at least 15 minutes. If a contact lens is present, do not delay irrigation or attempt to remove the lens. Continue rinsing. Call a physician or poison control center immediately.
- Skin: Remove contaminated clothing immediately and wash skin with soap and water. Call a physician or poison control center immediately. Chemical burns must be treated by a physician.
- Swallowed: Call a physician or poison control center immediately. If swallowed, rinse mouth with water (only if the person is conscious). Do not induce vomiting.
- Breathing it in: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Oxygen or artificial respiration if needed. Call a physician or poison control center immediately.
Fire
Use water fog, alcohol foam, foam, dry chemical powder or carbon dioxide (CO2). Do not use water jet as an extinguisher. Fire may produce irritating, corrosive and/or toxic gases. Wear full protective clothing and self-contained breathing apparatus; cool containers with water spray.
Spills
Wear appropriate protective equipment and clothing. For large spills, stop the flow if safe, dike, cover with plastic sheet, and soak up with non-combustible material such as vermiculite, sand or earth. For small spills, wipe up with absorbent material and clean the surface thoroughly. Avoid release to the environment and do not contaminate water.
Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.
En español
Pictogramas: Corrosivo, Irritante / nocivo
Las indicaciones de peligro de esta hoja están arriba, en inglés. El equipo de protección y los primeros auxilios están arriba, como los dice la hoja. La hoja completa del fabricante es el documento oficial.
Try IDSDS free