Ergon Armor (Ergon Asphalt & Emulsions, Inc.)
6711 Hardener SDS
Safety Data Sheet for Ergon Armor (Ergon Asphalt & Emulsions, Inc.) 6711 Hardener, revised 2022-11-04.


Hazards
- Harmful if swallowed.
- Causes severe skin burns and eye damage.
- May cause an allergic skin reaction.
- Harmful in contact with skin.
- Causes serious eye damage.
Protective equipment
- Wear safety glasses; chemical goggles (if splashing is possible).
- Nitrile, butyl rubber or neoprene gloves are recommended. Impervious gloves. PVC disposable gloves. Chemical resistant gloves.
- Wear appropriate clothing to prevent any possibility of skin contact.
- When workers are facing concentrations above the exposure limit they must use appropriate certified respirators.
- Wear appropriate thermal protective clothing, when necessary.
First aid
- Eyes: Immediately flush with plenty of water for up to 15 minutes. Remove any contact lenses and open eyelids widely. If irritation persists: Continue flushing during transport to hospital. Take along these instructions.
- Skin: Remove contaminated clothing immediately and wash skin with soap and water. Get medical attention if irritation develops and persists.
- Swallowed: If swallowed, do NOT induce vomiting. Rinse mouth. If ingestion of a large amount does occur, call a poison control center immediately. Never give anything by mouth to a victim who is unconscious or is having convulsions. If vomiting occurs naturally, have victim lean forward to reduce risk of aspiration.
- Breathing it in: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. Oxygen or artificial respiration if needed. Call a physician if symptoms develop or persist.
Fire
Use alcohol resistant foam, carbon dioxide, dry chemical powder, water fog, dry sand or limestone powder; do not use a water jet. Self-contained breathing apparatus and full protective clothing must be worn. Decomposition may yield poisonous gases including oxides of nitrogen, hydrogen gas and ammonia.
Spills
Keep unnecessary personnel away and avoid breathing mist/vapors. Large spills: stop the flow if without risk, dike, cover with plastic sheet, absorb in vermiculite, dry sand or earth, and place into containers. Small spills: wipe up with absorbent material. Avoid discharge into drains, water courses or the ground.
Ingredients (SDS section 3)
| Ingredient | CAS number | Amount |
|---|---|---|
| BENZYL ALCOHOL | 100-51-6 | 30 - 50 |
| 3-AMINOMETHYL-3,5,5-TRIMETHYLCYCLOHEXYLAMINE | 2855-13-2 | 25 - 45 |
| TRIMETHYLHEXAMETHYLENE DIAMINE | 25620-58-0 | 1 - 20 |
| Other components below reportable levels | 14.55 | |
| 2,4,6-TRIS(DIMETHYLAMINOMETHYL)PHENOL | 90-72-2 | 1 - 10 |
Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.
En español
Pictogramas: Corrosivo, Irritante / nocivo
Las indicaciones de peligro de esta hoja están arriba, en inglés. El equipo de protección y los primeros auxilios están arriba, como los dice la hoja. La hoja completa del fabricante es el documento oficial.
Try IDSDS free