Flex Glaze Topcoat Part A 1760 SDS
Safety Data Sheet for Dex-O-Tex Flex Glaze Topcoat Part A 1760, revised 2015-01-29.

Hazards
- H317 May cause an allergic skin reaction
Protective equipment
- Splash goggles or safety glasses. Face-shields are recommended when the operation can generate splashes, sprays or mists.
- Wear appropriate gloves for routine industrial use. Use appropriate gloves for spill response, as stated in Section 6 of this MSDS (Accidental Release Measures).
- Use body protection appropriate for task. Cover-all, rubber aprons, or chemical protective clothing made from natural rubber are generally acceptable, depending upon the task.
- If adequate ventilation is not available or if there is potential for airborne exposure above the exposure limits, a respirator may be worn up to respirator exposure limitations. For a higher level of
First aid
- Eyes: Open victim's eyes under gentle running water and have victim "roll" eyes. Flush a minimum of 15 minutes. Do not use oils or ointments. Victim must seek immediate medical attention.
- Skin: Immediately begin decontamination with running water for a minimum of 15 minutes. Remove contaminated clothing, taking care not to contaminate eyes. Victim must seek medical attention and remain under medical observation for 24 hours after major skin contact.
- Swallowed: Call physician or poison control center for most current information. If professional advice is not available, do not induce vomiting. Victim should drink 1-2 glasses of water or milk. Never induce vomiting or give diluents to someone who is unconscious, having convulsions, or who cannot swallow.
- Breathing it in: Remove victim to fresh air. If necessary, use artificial respiration to support vital functions. Remove or cover gross contamination to avoid exposure to rescuers.
Fire
Use water spray, foam, carbon dioxide, dry chemical, or any ABC class extinguisher. Keep fire-exposed containers cool with water spray. Structural firefighters must wear Self-Contained Breathing Apparatus and full protective equipment. Run-off may cause pollution.
Spills
Trained personnel should clear the area and use impermeable gloves, goggles, face shield and appropriate body protection. Absorb spilled liquid with polypads or other suitable absorbent, neutralize residue with sodium bicarbonate and water rinse, decontaminate the area, and dispose of residue per federal, state and local hazardous waste regulations.
Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.
En español
Pictogramas: Irritante / nocivo
Peligros:
- Puede provocar una reacción alérgica en la piel
Indicaciones de peligro en la redacción oficial del SGA en español. El equipo de protección y los primeros auxilios están arriba, como los dice la hoja. La hoja completa del fabricante es el documento oficial.
Try IDSDS free