CRC Industries

Engine Assembly Lube SDS

Safety Data Sheet for CRC Industries Engine Assembly Lube, revised 2017-10-23.

Open the full SDS (PDF)

Hazards

• The mixture does not meet the criteria for classification.

Protective equipment

• Wear safety glasses with side shields (or goggles).
• Wear protective gloves such as: Neoprene. Nitrile. Polyethylene. Polyvinyl chloride (PVC).
• Wear suitable protective clothing.
• If engineering controls are not feasible or if exposure exceeds the applicable exposure limits, use a NIOSH-approved cartridge respirator with an organic vapor cartridge. Use a self-contained breathin

First aid

• Eyes: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Remove contact lenses, if present and easy to do. Get medical attention if irritation develops and persists.
• Skin: Remove and isolate contaminated clothing and shoes. Immediately flush skin with plenty of water. Get medical attention if irritation develops and persists.
• Swallowed: Rinse mouth. Do not induce vomiting without advice from poison control center. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Never give anything by mouth to a victim who is unconscious or is having convulsions. Get medical attention if symptoms occur.
• Breathing it in: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. Call a physician if symptoms develop or persist.

Fire

Use fire-extinguishing media appropriate for surrounding materials. Firefighters must use standard protective equipment including flame retardant coat, helmet with face shield, gloves, rubber boots, and in enclosed spaces, SCBA. Use water spray to keep fire-exposed containers cool and to knock down vapors which may result from product decomposition.

Spills

Keep unnecessary personnel away. Ensure adequate ventilation. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. For personal protection, see section 8 of the SDS. Sweep up or vacuum up spillage and collect in suitable container for disposal. Following product recovery, flush area with water. For waste disposal, see section 13 of the SDS. Avoid discharge into drains, water courses or onto the ground.

Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.