CRC Industries

en-1005025 SDS

Safety Data Sheet for CRC Industries en-1005025, revised 2021-06-02.

Open the full SDS (PDF)

Hazards

• The mixture does not meet the criteria for classification.

Protective equipment

• Wear safety glasses with side shields (or goggles).
• Wear protective gloves, if needed: Nitrile. Neoprene. Rubber.
• No personal respiratory protective equipment normally required. Use a self-contained breathing apparatus in confined spaces and for emergencies.
• Wear suitable protective clothing.
• Wear appropriate thermal protective clothing, when necessary.

First aid

• Eyes: Direct contact with eyes may cause temporary irritation.
• Skin: Rinse skin with water/shower. Get medical attention if irritation develops and persists.
• Swallowed: Rinse mouth. If ingestion of a large amount does occur, call a poison control center immediately.
• Breathing it in: If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing.

Fire

Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2). Cool containers with water spray. Use standard firefighting procedures and consider the hazards of other involved materials.

Spills

Keep unnecessary personnel away. Wear appropriate protective equipment and clothing during clean-up. Ensure adequate ventilation. For personal protection, see section 8 of the SDS. This product is miscible in water. Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Cover with plastic sheet to prevent spreading. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water. Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remov

Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.