ChemMasters

Polyseal SDS

Safety Data Sheet for ChemMasters Polyseal, revised 2018-06-25.

Open the full SDS (PDF)

Hazards

• H226 Flammable Liquid and Vapour
• H332 Harmful if inhaled
• H335 May cause respiratory irritation
• H336 May cause drowsiness or dizziness
• H304 May be fatal if swallowed and enters airways
• H411 Toxic to aquatic life with long lasting effects

Protective equipment

• Use proper protection – Safety Glasses as a minimum
• Use chemical protective gloves as a minimum
• Skin contact must be avoided by using impervious protective clothing (gloves, aprons, boots, etc.)
• Use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines; where concentrations are

First aid

• Eyes: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice or attention.
• Skin: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. Wash off with soap and plenty of water. If skin irritation occurs: Get medical advice or attention.
• Swallowed: IF SWALLOWED: Immediately call a POISON CENTER/doctor. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth if conscious.
• Breathing it in: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.

Fire

Use alcohol-resistant foam, dry chemical, halon or carbon dioxide. In a fire or if heated a pressure increase will occur and the container may burst. Vapors are flammable, heavier than air, and may travel to remote ignition sources causing flashback. Wear self-contained breathing apparatus and full protective gear; use water spray to cool unopened containers.

Spills

Use personal protective equipment, remove ignition sources, ensure adequate ventilation, and evacuate personnel to safe areas. Prevent leakage if safe to do so and do not let product enter drains or waterways. Contain spillage, then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal per local regulations.

Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.