Charlotte Pipe

POWERCRON BLACK PASTE SDS

Safety Data Sheet for Charlotte Pipe POWERCRON BLACK PASTE, revised 2025-12-23.

Open the full SDS (PDF)

Hazards

• Suspected of causing cancer.

Protective equipment

• Safety glasses with side shields.
• Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. For prolonged or
• Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
• Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this
• Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. The respiratory protection shall be in accordance to 29

First aid

• Eyes: Remove contact lenses, irrigate copiously with clean, fresh water, holding the eyelids apart for at least 10 minutes and seek immediate medical advice.
• Skin: Remove contaminated clothing and shoes. Wash skin thoroughly with soap and water or use recognized skin cleanser. Do NOT use solvents or thinners.
• Swallowed: If swallowed, seek medical advice immediately and show this container or label. Keep person warm and at rest. Do NOT induce vomiting.
• Breathing it in: Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.

Fire

Use an extinguishing agent suitable for the surrounding fire. In a fire or if heated, a pressure increase will occur and the container may burst. Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

Spills

Stop leak if without risk. Move containers from spill area. For small spills, dilute with water and mop up if water-soluble, or absorb with an inert dry material and place in an appropriate waste disposal container. For large spills, contain with non-combustible absorbent material and dispose via a licensed waste disposal contractor.

Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.