Brickform

SM-PRO-PLUS-GRAY-SDS SDS

Safety Data Sheet for Brickform SM-PRO-PLUS-GRAY-SDS, revised 2021-01-28.

Open the full SDS (PDF)

Hazards

• Causes severe skin burns and eye damage
• May cause an allergic skin reaction
• May cause cancer
• May cause respiratory irritation
• Causes damage to lungs through prolonged or repeated inhalation exposure.

Protective equipment

• Wear safety glasses with side shields (or goggles).
• Wear protective gloves and protective clothing.
• Wear protective gloves and protective clothing.
• If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA approved respiratory protection should be worn. Positive-pressure supplied air respirators may be required for high airborne co

First aid

• Eyes: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. If symptoms persist, call a physician.
• Skin: Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. If skin irritation persists, call a physician.
• Swallowed: Rinse mouth. Drink 1 or 2 glasses of water. Do not induce vomiting without medical advice. Call a physician immediately.
• Breathing it in: Remove victim to fresh air and keep at rest in a position comfortable for breathing. If symptoms persist, call a physician.

Fire

Use extinguishing measures appropriate to local circumstances and the surrounding environment. Water spray may be inefficient. Wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.

Spills

Avoid contact with skin, eyes or clothing and avoid breathing dust. Prevent further leakage or spillage if safe to do so. Pick up and transfer to properly labeled containers; clean contaminated areas thoroughly observing environmental regulations.

Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.