Artesian-Stain-SDS SDS

Safety Data Sheet for Brickform Artesian-Stain-SDS, revised 2021-06-10.

Protective equipment

Wear safety glasses with side shields (or goggles).
Wear protective gloves and protective clothing.
If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA approved respiratory protection should be worn. Positive-pressure supplied air respirators may be required for high airborne co

First aid

Eyes: Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper eyelids. Consult a physician.
Skin: Wash skin with soap and water.
Swallowed: Clean mouth with water and drink afterwards plenty of water.
Breathing it in: Remove to fresh air.

Fire

Use water spray (fog), carbon dioxide (CO2), foam or dry chemical; water spray may be inefficient. Firefighters should wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. Hazardous combustion products: carbon oxides.

Spills

Ensure adequate ventilation, especially in confined areas. Prevent further leakage or spillage if safe to do so. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust) and transfer to properly labeled containers.

Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.

Keep this SDS on your job site. Add it to a job's SDS list in IDSDS and every worker can open it from their phone, scan a label to find it, and read it in Spanish.
Try IDSDS free