Andek

RoofdX Copper SDS

Safety Data Sheet for Andek RoofdX Copper, revised 2022-08-29.

Open the full SDS (PDF)

Hazards

• Flammable liquid and vapor.
• May be harmful if swallowed and enters airways.
• Causes mild skin irritation.
• Causes eye irritation.
• May be harmful if inhaled.
• Toxic to aquatic life.

Protective equipment

• Safety glasses equipped with side shields are recommended as minimum protection in industrial settings.
• Wear goggles if splashing or spraying is anticipated.
• Wear goggles and face shield if material is heated above 125°F (51°C).
• Use gloves constructed of chemical resistant materials such as heavy nitrile rubber if frequent or prolonged contact is expected.
• Use heat-protective gloves when handling product at elevated temperatures.
• If elevated airborne concentrations above applicable workplace exposure levels are anticipated, a NIOSH-approved organic vapor respirator equipped with a dust/mist prefilter should be used.
• Use clean protective clothing if splashing or spraying conditions are present.
• Protective clothing may include long-sleeve outer garment, apron, or lab coat.
• Wear heat protective boots and protective clothing when handling material at elevated temperatures.

First aid

• Eyes: Thoroughly flush the eyes with large amounts of clean low-pressure water for at least 15 minutes, occasionally lifting the upper and lower eyelids. If irritation persists, seek medical attention.
• Skin: Get medical aid. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing/shoes.
• Swallowed: Do Not induce vomiting. If vomiting does occur, have victim lean forward to prevent aspiration. Rinse mouth with water. Seek medical attention. Never give anything by mouth to an unconscious individual.
• Breathing it in: Remove person to fresh air. If signs/symptoms continue, get medical attention. Give oxygen or artificial respiration as needed.

Fire

Use dry chemicals, CO², water spray or alcohol-resistant foam for small fires; use water spray, water fog or alcohol-resistant foam for large fires. Wear self-contained breathing apparatus and protective clothing; keep unopened containers cool by spraying with water.

Spills

Do Not inhale vapors; ensure adequate ventilation and remove ignition sources. Stop leak and contain spill if safe. Prevent product from entering drains. Absorb with an inert dry material and place in an appropriate waste disposal container.

Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.