Andek

Cocoon 111 SDS

Safety Data Sheet for Andek Cocoon 111, revised 2018-08-13.

Open the full SDS (PDF)

Hazards

• Highly flammable liquid and vapor.
• May be harmful if swallowed and enters airways.
• Causes skin irritation.
• Causes eye irritation.
• Harmful if inhaled.

Protective equipment

• Wear protective gloves/protective clothing/eye protection/face protection.
• Use gloves constructed of chemical resistant materials such as heavy nitrile rubber if frequent or prolonged contact is expected.
• Use clean protective clothing if splashing or spraying conditions are present.
• Protective clothing may include long-sleeve outer garment, apron, or lab coat.
• Safety glasses equipped with side shields are recommended as minimum protection in industrial settings.
• Wear goggles if splashing or spraying is anticipated.
• Wear goggles and face shield if material is heated above 125°F (51°C).
• The need for respiratory protection is not anticipated under normal use conditions and with adequate ventilation. If elevated airborne concentrations above applicable workplace exposure levels are ant

First aid

• Eyes: Thoroughly flush the eyes with large amounts of clean low-pressure water for at least 15 minutes, occasionally lifting the upper and lower eyelids. If irritation persists, seek medical attention.
• Skin: Get medical aid. Immediately flush skin with plenty of soap and water for at least 15 minutes while removing contaminated clothing/shoes.
• Swallowed: Do Not induce vomiting. If vomiting does occur, have victim lean forward to prevent aspiration. Rinse mouth with water. Seek medical attention. Never give anything by mouth to an unconscious individual.
• Breathing it in: Remove person to fresh air. If signs/symptoms continue, get medical attention. Give oxygen or artificial respiration as needed.

Fire

Small fire: use dry chemicals, CO², water spray or alcohol-resistant foam. Large fire: use water spray, water fog or alcohol-resistant foam, and cool all affected containers with flooding quantities of water. Wear self-contained breathing apparatus and protective clothing; keep unopened containers cool by spraying with water.

Spills

Do Not inhale vapors, mist or gas. Ensure adequate ventilation, remove all sources of ignition, and evacuate personnel to safe areas. Stop leak and contain spill if possible and safe to do so; prevent product from entering drains. Absorb with an inert dry material and place in an appropriate waste disposal container.

Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.