Acry-Tech Coatings

THERM-X-Fluid Applied Elastomeric Sealant Coating SDS

Safety Data Sheet for Acry-Tech Coatings THERM-X-Fluid Applied Elastomeric Sealant Coating, revised 2020-09-15.

Open the full SDS (PDF)

Hazards

• Suspected of causing cancer

Protective equipment

• Wear approved safety goggles where a splash hazard exists.
• Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.
• For spills or overexposure wear NIOSH approved respiratory protection with organic vapor cartridges.

First aid

• Eyes: Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention.
• Skin: Wash off immediately with soap and plenty of water. If skin irritation persists, call a physician.
• Swallowed: Drink 1 or 2 glasses of water. Call a physician.
• Breathing it in: Remove to fresh air. Seek medical attention.

Fire

Use carbon dioxide (CO2) or dry chemical; water aggravates spill clean up. Material can splatter above 100 degrees Celsius; dried film may burn. Wear self-contained breathing apparatus and full protective gear.

Spills

Prevent further leakage or spillage if safe to do so. Recover free liquid, spread material evenly on a plastic film and allow to dry thoroughly. Dispose of in accordance with federal, state and local regulations.

Summary taken from the SDS and checked by IDSDS. The full SDS is the official document.